Skip to product information
1 of 3

Beyond Robotix

Heated Pitot

Heated Pitot

All-Weather Airspeed Sensor and Barometer

Operating Speed

Upcoming Products - Register Your Interest!

Meet the Beyond Robotix Heated Pitot, the airspeed sensor that keeps working through harsh weather. Built for icing and wet conditions, it continues to deliver accurate airspeed and barometric altitude data at high airspeeds, with significant heating power available on demand. It's ideal for anyone who needs to keep flying beyond fair weather.

Why You'll Love It

The Heated Pitot integrates our AUAV air data sensor into the probe, giving you airspeed and altitude. Closed-loop temperature control delivers exactly the heat the conditions demand. DroneCAN readings and heater control integrate seamlessly with Ardupilot and PX4.

Custom loom lengths, tube lengths and mounts are available for volume orders. Contact admin@beyondrobotix.com to discuss your requirements.

Product Details

  • Compatibility: Works seamlessly with Ardupilot and PX4 over DroneCAN
  • Connectors: Pixhawk and Cube compatible JST-GH CAN connectors, XT30 heater power input
  • Sensors: All Sensors AUAV differential and absolute pressure sensor, for airspeed and altitude
  • Heating: Closed-loop temperature control up to 70W, with an adjustable 40°C - 80°C target
  • Control: Switch the heater on and off from your autopilot, with live heater telemetry

What's Included

  • Heated pitot probe
  • Heater control module
  • JST-GH CAN cable
  • Quick start guide
  • 1 year warranty

Specifications

  • Input Voltage: 12 - 53V (operates down to 9V with reduced heating power)
  • Maximum Power Consumption: 70W (configurable)
  • Standby Power: 1W
  • Operating Temperature: -40°C - 80°C
  • Heater Target Temperature: 40°C - 80°C (60°C default)
  • Power Connector: XT30
  • CAN Connectors: 2x JST-GH 4 Pin (compatible with Pixhawk and Cube CAN port)
  • Telemetry: Heater temperature, voltage, current, power and state over DroneCAN at 5Hz

See the resources section for our GitBook documentation, including 3D models of the probe and control module!

View full details
Airspeed Through Ice and Rain

Airspeed Through Ice and Rain

An iced or waterlogged pitot tube is one of the fastest ways to lose a fixed wing aircraft. The Heated Pitot keeps its ports clear in extreme icing and wet conditions, so your autopilot keeps getting the airspeed it relies on.

Tested in sub-zero conditions in Iceland, it's built for operators who can't wait for fair weather.

Heat on Demand

Heat on Demand

Closed-loop control holds the probe at its target temperature and delivers only the power the conditions need, typically 15 - 35W across a wide range of airspeeds and outside air temperatures, with up to 70W in reserve for the harshest conditions.

Need to protect your power budget? Cap the maximum heater power, or enable fair weather mode so the heater idles at 1W until it's cold enough to matter.

In Control from Your Autopilot

In Control from Your Autopilot

Switch the heater on and off from Ardupilot or PX4 over DroneCAN, just like any other actuator. If the command link is lost, the heater fails safe to on, so a dropped connection never leaves your pitot unheated.

Live telemetry reports heater temperature, power and state at 5Hz, so you can see exactly what your pitot is doing in flight and in your logs.

Kind to Your Avionics

Kind to Your Avionics

The heater draws from its own 12 - 53V supply through an XT30 connector, while the sensor and electronics run from the CAN bus. Precise power control means high heating power never puts your avionics under stress.

Dual Pixhawk and Cube compatible JST-GH connectors make it easy to daisy chain into your existing DroneCAN network.

Not Just an Airspeed Sensor

Not Just an Airspeed Sensor

Our AUAV air data sensor is built into the probe, taking both a differential and an absolute pressure measurement. That means airspeed and barometric altitude from one sensor, across a wide range of speed options.

Measuring static pressure at the probe avoids the errors internal autopilot barometers suffer from fuselage pressure changes.

Tested Before it Ships

Tested Before it Ships

Every Heated Pitot is tested before it leaves us, and you can see the results for yourself. Simply enter the UID on our results site to pull up your individual test certificate, measured values, the tests it passed and the date of testing.

FAQs

What is the Beyond Robotix Heated Pitot?

The Heated Pitot is a heated airspeed probe with an integrated air data sensor, designed to keep delivering accurate airspeed and barometric altitude to your autopilot in icing and wet conditions. It connects over DroneCAN and supports Ardupilot and PX4.

What power supply does the Heated Pitot need?

The heater runs from a 12 - 53V supply through the XT30 connector on the control module. It will operate down to 9V, but maximum heater power reduces below 12V, so we don't recommend running below 12V. The sensor and electronics are powered from the 5V CAN bus.

How much power does the Heated Pitot use in flight?

The heater regulates to a target temperature, so power varies with airspeed, outside air temperature, altitude and moisture. In dry conditions at sea level it typically draws 15 - 35W across a wide range of conditions, plus around 5W when melting ice, up to a maximum of 70W. Standby power is 1W. You can cap the maximum power with the P_MAX parameter.

Can I turn the heater on and off from my autopilot?

Yes. The heater listens to a DroneCAN actuator channel, so you can switch it on and off from Ardupilot or PX4. If no command is received for 5 seconds while the heater is off, it fails safe to on so a lost link never leaves the pitot unheated.

How do I monitor the heater?

The Heated Pitot publishes heater temperature, voltage, current, output power and state over DroneCAN at 5Hz. Most ground stations show this as a battery, and our telemetry documentation explains how to read each field.

Can the Heated Pitot be customised for my aircraft?

For volume orders we can supply custom loom lengths between the control module and probe, custom tube lengths and custom mounts. Contact admin@beyondrobotix.com to discuss your requirements.